从这里了解印度人对中国的看法

苏州出现3D打印的别墅

2015-01-19 20:54 61个评论 字号:

近日,数幢使用3D打印技术建造的建筑亮相苏州工业园区。这批建筑包括一栋面积1100平米的别墅和一栋6层居民楼。这些建筑的墙体由大型3D打印机层层叠加喷绘而成,而打印使用的“油墨”则由建筑垃圾制成。记者看到,房子的墙体看上去就是用水泥建造出来的一样,一层层波浪形的层次非常分明,每层水泥也就两厘米左右厚。虽然手感粗糙,但每层之间密不透风,看上去浑然一体。哪怕是墙体的拐角也没有丝亮裂缝。不过,每个楼层之间的楼板与墙体之间,看上去明显是拼装的。

外文标题:3D printed houses seen in China’s Suzhou
外文地址:http://defence.pk/threads/3d-printed-houses-seen-in-chinas-suzhou.354344/

3dd85d5bg9e40024d75ed&690

11

22

33

以下是讨论:

译文来源:三泰虎 http://www.santaihu.com/2015011907.html

Orakzai(巴基斯坦)
China is already emerging as a trend setter.

中国已经崛起为时尚领袖

 

gambit(美国)
This means once the house is built, there will be no room (pun intended) for modifications.

这意味着,一旦房子建好了,就没有修改的余地了

 

FairAndUnbiased
Yes, that is what most ppl call “user friendly”, just as Apple isn’t very modifiable.

是的,这就是大多数人所谓的“用户友好”,正如苹果就是修改性不强

 

gambit(美国)
In my house, which was built the old fashioned way in 1999, I can remove an entire wall and expand a room. In fact, an entire industry exists for this purpose: Home improvements.

我房子是1999年修建的老款式。我可以拆掉一整扇墙,扩建一个房间。

实际上,专门有一个行业是做这个的,即家居改建

 

gambit(美国)
For a house built with 3D printed structures, how can you replace a wall if that wall became structurally unsound for any reason, such as your son slammed his toy car into the wall or there was a grease fire that damaged the wall ? The builder probably designed the house so that you can remove the wall but to replace it with what ? There are still unanswered questions.

Am not saying this is bad or even flawed. Am just saying there are inevitable compromises.

一座采用3D打印结构的房子,要是一扇墙因为某种原因变得不牢固,比如你儿子用他的玩具车把墙撞坏了,那么你如何把那扇墙换掉?

建商设计的时候肯定有考虑到这点,但是用什么来换?

这些问题还有待回答。

我没说这不好,或者有瑕疵,我只是说存在不可避免的折中方案

Armstrong(巴基斯坦)
Son slamming a toy car makes the wall structurally unsound ? :o:

What kind of a toy car does your little one drive ? :unsure:

Or are walls over there in the States not made from bricks and layers of cement anymore ?

儿子开玩具车把墙体结构撞坏了? :o:

你小孩开的是怎么样的玩具车? :unsure:

还是说美国房子的墙壁不是用砖块和水泥建的?

 

FairAndUnbiased
I suspect that the entire house is not 3-D printed but the components are. Thus they’d just be like any other modular construction.

我怀疑整座房子是否用3D打印的,而是部件组装起来的,所以才会像其他部件结构的房子一样

 

Dreamerx(印度)
China amazes me , they are like ants , never at rest .

中国让我吃惊啦,他们就像是永远不休息的蚂蚁

 

BoQ77(越南)
How to finish it into liveable status ?

如何让这座房子变得适宜居住?



友荐云推荐

无觅相关文章插件,快速提升流量